The DRY-SMART ALU comes with a pre-assembled frame that you can flexibly attach to the ceiling.
Choose a spot for your clothes drying rack that is no less than 30 centimeters and no more than 1 meter away from the wall. Hold the frame against the ceiling and mark the corners with a pen.
STEP 2
Now attach the ceiling rollers "D" to these markings. Depending on the type of ceiling, you will need the appropriate dowels.
STEP 3
The four wall rollers are located in a beam that you can attach up to 15 centimeters below the ceiling with just a few screws.
STEP 4
Attach the wall hook directly below this roller beam. Choose a comfortable height between 1 and 1.5 meters.
STEP 5
Now you can cut the fastening rope into four pieces. Two of the sections should be slightly longer. You'll need this extra length to guide the ropes across the width of the drying frame. Thread each rope through one of the wall pulleys. Have someone help you keep the ropes taut so they don't slip out of the ceiling pulleys while you thread them.
STEP 6
Now pull the clothes drying rack up to the ceiling and straighten it using the four ropes. Tie a knot in each rope so you can hook it onto the wall hook. To achieve a comfortable working height, tie another knot with the drying rack lowered.
If you want multiple working heights, start with the highest and gradually add more nodes for lower settings.